Axis Wakeboard Boat Forum
http://www.axiswakeboardboats.com/

2017 A22 Changing Propeller
http://www.axiswakeboardboats.com/viewtopic.php?f=16&t=4856
Page 1 of 1

Author:  mdean4421 [ Wed Aug 07, 2019 8:54 pm ]
Post subject:  2017 A22 Changing Propeller

Hey Everyone, I’m re-proping my Axis with a torque propeller.

I have the a new Acme prop and cotter pin. I watched a few videos online tonight and it shows everyone using a prop puller. I don’t currently have one of those, but I want to knock the project out this weekend if possible.

My question is how hard is it to get the prop off without a puller? Doesn’t seem that hard, but I’ve never done it.

Thanks,


Sent from my iPhone using Tapatalk

Author:  JohnnyK [ Sun Aug 18, 2019 11:02 pm ]
Post subject:  Re: 2017 A22 Changing Propeller

You’ll def need a prop puller. Even then it will take a few good hits with the hammer to get the prop loose


Sent from my iPhone using Tapatalk

Author:  glovert [ Mon Sep 16, 2019 10:16 pm ]
Post subject:  Re: 2017 A22 Changing Propeller

I hope by now you have already changed your prop. If not, I had a difficult time changing mine. It came with a 5 bladed OJ Prop, the blades didn't have enough clearance for a prop puller. After talking with an OJ rep and just about all the marina's in my area, heating the prop with a propane torch was what they all recommended. Thankfully that worked, heating it up carefully and using a wood 4X4 and Mallet. 4 hits and it came off.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/