| Axis Wakeboard Boat Forum http://www.axiswakeboardboats.com/ |
|
| Plug and play fill time to estimate weight added to boat http://www.axiswakeboardboats.com/viewtopic.php?f=15&t=3632 |
Page 1 of 1 |
| Author: | buffaxis [ Sat May 14, 2016 3:10 pm ] |
| Post subject: | Plug and play fill time to estimate weight added to boat |
Does anyone know how many gallons per minute the T22 takes on so i can estimate the weight distribution if I don't want to fill the entire hard tank plus extra ballast bags the boat has around 3000b total ballast capability. I purchased the boat used and I don't need 3k lbs all the time. there are two 750lbs in back and then a sac up front as well plus hard tanks. Unless there is some other way to factor how much ballast I am adding. thanks |
|
| Author: | 2016A22inCO [ Sun May 15, 2016 12:01 am ] |
| Post subject: | Re: Plug and play fill time to estimate weight added to boat |
I was told at the dealer 100gal/min. Sent from my iPhone using Tapatalk |
|
| Author: | buffaxis [ Sun May 15, 2016 8:26 am ] |
| Post subject: | Re: Plug and play fill time to estimate weight added to boat |
thanks this would make sense. so 100 gallons a minute or 800 lbs per minute. if everything were perfect. or about 5 minutes to fill the boat.. thanks |
|
| Author: | 2016A22inCO [ Sun May 15, 2016 8:48 am ] |
| Post subject: | Re: Plug and play fill time to estimate weight added to boat |
Sorry edited my post (must have been a late night) should have said gallons per minute. So for example my rear hard tanks + 750lb sacks take about 10-11 min. I never timed them but that feels about right. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|