| Axis Wakeboard Boat Forum http://www.axiswakeboardboats.com/ |
|
| Wetsounds problem http://www.axiswakeboardboats.com/viewtopic.php?f=15&t=3011 |
Page 1 of 1 |
| Author: | coversjim [ Sun May 03, 2015 6:15 pm ] |
| Post subject: | Wetsounds problem |
Ordered 2 new rev410 for the tower and replaced my SYN4 with a SD4. Problem is only 1 of the speakers really works at a time. One of them is loud the other barely has any sound. If I switch the speaker wire around on the amp switches which 410 works normal and the other gets super quiet. I know it isn't the head unit or the ws420 eq because I ran aux right off the amp to my phone so that isn't even in the loop Ideas? Only thing I can come up with is the amp is bad. I have the amp set to bridged and stereo settings. Thank you. |
|
| Author: | boardjnky4 [ Sun May 03, 2015 7:45 pm ] |
| Post subject: | Re: Wetsounds problem |
It shouldn't be set to stereo on tower speakers, but i doubt that's the problem. You cannot discern stereo vs mono from 70 ft behind the boat. |
|
| Author: | coversjim [ Sun May 03, 2015 8:13 pm ] |
| Post subject: | Re: Wetsounds problem |
I didn't know I should have it set to mono I will change that. Don't know that will fix the problem but thanks for the tip |
|
| Author: | coversjim [ Mon May 04, 2015 9:42 am ] |
| Post subject: | Re: Wetsounds problem |
talked to wetsounds. apparently even tho i have the amp set to channel 1+2 only as i have it bridged. i still need to adjust the gains and high pass for 3+4. going to test and see if this works tonight. user error sounds like. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|