It is currently Thu Mar 28, 2024 2:25 pm

All times are UTC - 6 hours





Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Depth Finder Install
PostPosted: Tue Mar 19, 2013 6:24 pm 
Offline
Team Axis

Joined: Mon May 23, 2011 11:02 am
Posts: 1849
Location: Copperas Cove, TX
The transducer can penetrate through the hull...no drilling.

_________________
2014 A24
2011 A22 (sad to see her go)


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Sun May 26, 2013 7:29 am 
Offline
Team Axis

Joined: Sun Jul 08, 2012 10:05 pm
Posts: 50
Did anyone ever locate the correct part number for the depth finder?

If not can someone look for tag at the connector end for me?

My boat didn't come with one and I would like to install it myself without going through the dealer.

Thanks,
Jason


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Sat May 10, 2014 8:51 am 
Offline
Newbie
User avatar

Joined: Tue Apr 22, 2014 5:57 am
Posts: 22
jasonyng wrote:
Did anyone ever locate the correct part number for the depth finder?

If not can someone look for tag at the connector end for me?

My boat didn't come with one and I would like to install it myself without going through the dealer.

Thanks,
Jason


Image

That is the part number for the transducer just bought it and need to get it installed. Can anyone follow the transducer wire and take a picture of the connector I have tried my best to find it but cant. The wire that comes with the transducer is only 3 feet or so long so I am hoping that it has a connector in between the transmission and the engine but I could be wrong.

Image

This is the connector that came with the transducer that I bought from the dealer.

Image


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Thu Jan 15, 2015 6:48 pm 
Offline
Team Axis

Joined: Sun Jul 08, 2012 10:05 pm
Posts: 50
Did you ever get this installed?


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Thu Jan 15, 2015 7:08 pm 
Offline
Newbie
User avatar

Joined: Tue Apr 22, 2014 5:57 am
Posts: 22
I did actually cut a whole in the bottom of my boat with a 2 inch hole saw was pretty straight forward was a little nervous doing it but turned out looking very nice.


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Thu Jan 15, 2015 7:12 pm 
Offline
Newbie
User avatar

Joined: Tue Apr 22, 2014 5:57 am
Posts: 22
This is one of the videos I watched before I started cutting into my boat though it is a thru hull ballast fitting it all pertains to installing the transducer.


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Thu Jan 15, 2015 7:13 pm 
Offline
Newbie
User avatar

Joined: Tue Apr 22, 2014 5:57 am
Posts: 22
http://m.youtube.com/watch?v=r8oprSN59A8

There is the link to the video


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Fri Jan 16, 2015 11:19 am 
Offline
Team Axis

Joined: Sun Jul 08, 2012 10:05 pm
Posts: 50
Did you find a cable? And I am assuming it plugs into he back of the gauge cluster? Did you try it without cutting the whole first?

Thanks


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Sat Jan 17, 2015 6:36 am 
Offline
Newbie
User avatar

Joined: Tue Apr 22, 2014 5:57 am
Posts: 22
There is a connector in between the engine and the transmission. I located it by removing the starboard engine partition and getting into the starboard engine compartment with my head pretty much touching the floor and looking at the back of the engine. I found it by getting in contact with the manufacturer and this is the trick they told me found it within 5 minutes with this information. The connector is in the big bundle of wires directly behind the engine in between the engine and transmission. As for using it without drilling I did not just wanted the factory installed look.


Top
 Profile  
 
 Post subject: Re: Depth Finder Install
PostPosted: Wed Jan 21, 2015 11:38 am 
Offline
Team Axis

Joined: Sun Jul 08, 2012 10:05 pm
Posts: 50
Thanks Josh! One last question, where did you get the transducer I cant find it online from a reliable source?

Thanks again,
Jason


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: