Axis Wakeboard Boat Forum http://www.axiswakeboardboats.com/ |
|
Axis Surf Gate Measurements - 2014 Axis A22 http://www.axiswakeboardboats.com/viewtopic.php?f=14&t=2095 |
Page 2 of 4 |
Author: | dezul [ Sun Oct 13, 2013 6:19 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Oh, my measurement are .25 in accuracy. Pretty much they are perfect. |
Author: | Ejones [ Sun Oct 13, 2013 9:32 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Thanks for doing those measurements dezul. I am new to the site. I am in the process of makeing my 2012 a20 have surf gates mounted with actuators but it would save a lot of time if u could get the model of the actuators or just the length of the stroke and also the whole actuator retracted end to end. Thanks again. |
Author: | morrisdl [ Mon Oct 14, 2013 4:55 am ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Malibu/axis uses Lenco 102 actuators. 4.25" stoke I believe. |
Author: | amsugg [ Tue Oct 15, 2013 2:57 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Can you get a deployed pic and measurements? I realize that I might be easier said then done |
Author: | Walter [ Tue Oct 15, 2013 4:06 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Thanks for all the pics and for the file dezul and Doug, as soon as my HDPE gets here I'm gonna be under way on mine, getting a head start Attachment: ImageUploadedByTapatalk1381874772.125268.jpg [ 204.47 KiB | Viewed 37622 times ] |
Author: | dezul [ Tue Oct 15, 2013 4:42 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Walter wrote: Thanks for all the pics and for the file dezul and Doug, as soon as my HDPE gets here I'm gonna be under way on mine, getting a head start Attachment: ImageUploadedByTapatalk1381874772.125268.jpg You should cut a cardboard or plywood cutout first just to ensure it matches perfectly on your boat. |
Author: | morrisdl [ Tue Oct 15, 2013 5:34 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Glad to help. I think you will want to cut the template the other way .... Attachment: uploadfromtaptalk1381880079147.jpg [ 37.69 KiB | Viewed 37614 times ] |
Author: | morrisdl [ Tue Oct 15, 2013 5:36 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
Where did you order the HDPE and many sqft? THanks! |
Author: | Walter [ Tue Oct 15, 2013 5:53 pm ] |
Post subject: | Axis Surf Gate Measurements - 2014 Axis A22 |
I used the amazon link in the poor gate thread, it was 3/4" thick and 24" X 52". It was 89$,I ordered one in black. I haven't finished cutting it out, I wanted to leave the measurements intact until my material comes in, the lines on my printout weren't exactly the same measurements, I need to put a straightedge to it and trace out the dimensions. |
Author: | nthsand [ Mon Oct 21, 2013 12:25 pm ] |
Post subject: | Re: Axis Surf Gate Measurements - 2014 Axis A22 |
There has to be a way of manually activating this like the wake plate. I was wondering if there is a way of attaching to the transom, where the swim platform is. With out damaging hull. I have a 2013, would love to attach and take off with out drilling holes. I wish they would just come out with retro fit one. |
Page 2 of 4 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |